MAINTENANCE
kortho
QiC i-series
H325 IAE
Rev.: 004
10-2
10.1.2 Platen
It is important that there are no air bubbles, indentations or debris in or on the platen material, as this will
cause poor prints and can damage the printhead.
Over long periods of time or use it may be necessary to change the platen due to deterioration of the
hardened rubber material.
Note:
Occasionally repositioning the platen can average the wear and increase the life span of the platen.
Fig. 10.2
Platen composition
10.2 Maintenance after replacing the ribbon roll
Each time the ribbon roll needs to be replaced the magazine needs to be cleaned.
Clean the ribbon movement sensor roller and the pressure roller with a cleaning swab or lint free cloth
soaked in isopropanol (2-propanol or isopropyl alcohol (IPA)) to remove debris, dirt and dust.
CAUTION:
Always follow the Safety guidelines presented in the SDS of the cleaning solution used.
Check the ribbon movement sensor spring for damage, replace the spring if required.
Fig. 10.3
Magazine cleaning
Make sure the pressure roller can move freely and firmly towards the ribbon movement sensor roller. Clean
the pressure roller arm if required.
i
1.
Hardened rubber sheeting
2.
Cushioning material
3.
Magnetic metal sheet
1.
Pressure roller
2.
Pressure roller arm
3.
Pressure roller spring
4.
Ribbon movement sensor spring
5.
Ribbon sensor roller
Содержание qic i series
