Kortho qic i series, Руководство пользователя

Страница: 64 / 186

OPERATION
kortho
QiC i-series H325 IAE
Rev.: 004
8-12
8.5 Magazine handling
8.5.1 Removing the magazine
1. Push the handle inwards and move the handle in a clockwise direction until the handle faces 9
o’clock.
Note:
The status LED will turn orange.
Fig. 8.17 Unlock magazine
2. Use both hands and pull on the magazine handles with equal force to remove the magazine.
CAUTION:
Do not place any your fingers in the opening in the main plate of the coding unit once the magazine
has been removed. This as there is a small change one cuts oneself on sharp edges on parts inside
the coding unit and there is a very small change one becomes trapped due to moving parts inside
the coding unit.
8.5.2 Placing the magazine
1. Align the magazine guide posts with the guide tubes mounted on the printer and slide the
magazine to its home position until it is fully engaged with the printer body.
Fig. 8.18 Lock magazine
2. Push in the handle and turn in an anti-clockwise direction until positioned at 6 o’clock.
3.
Push the front button (S) to reset the printer.
4. Check whether all LEDS are system ready (Status LED Green, Power LED blue).
5. If not paused, set the system in pause mode.
6. Make a test print by pushing the button again.
7. Set the system in run mode, the printer is now ready for printing.
i