DIAGNOSTICS / TROUBLESHOOTING
kortho
QiC i-series
H325 IAE
Rev.: 004
9-24
The contrast of the printed
label is decreasing as it is
printed
Check whether the coding unit is mounted in its frame correctly.
Check whether the coding unit is level and that the gap between the thermal
printhead and platen is no more than 3mm.
Verify whether the air pressure is set to 0,4MPa (4 bar) (0,5 MPa for QiC 107i).
The labels are not being
printed at the correct size
or position.
Check whether a timing or print request signal issue affects the setup (e.g. is the
substrate stopped when the system printer starts printing).
Check whether the delay setting is either too low or too high.
Check whether the substrate adjustment roller is correctly positioned.
Ask for technical assistance if the problem remains.
The begin of the print is
vague (Fig. 9.31) but the
platen is level with the
printhead
Check with QiC Draw whether the print speed is Ok. Reduce the print speed
with the speed adjustment screw if required.
Fig. 9.30
Grid test label printed with white lines in the print (print direction is from top to bottom)
Fig. 9.31
Grid test label printed with print speed too high (a speed peak at start of print)
Содержание qic i series
