Kortho qic i series, Руководство пользователя

Страница: 55 / 186

OPERATION
H325 IAE
Rev.: 004
kortho
QiC i-series
8-3
8.3.1 Text item input menu
The operator input text can be entered using the keyboard. The user prompt text can be set during label design.
Fig. 8.3 Text item input menu
The use of a user prompt is especially useful if a label has more than one text item that requires changing the
contents.
The Operator input shows the text which was used during the previous print run with the selected label or
the initial string defined in the label design program. In addition, the length of this string is defined in the
label design program. The string, which can contain any mix of characters, can be edited by the operator.
One can mark the character(s) which need to be edited and touch the required character(s) that need(s) to
replace the old character(s). Alternatively a cursor is indicating the location at which a new character will be
inserted.
Use the keys of the keyboard to enter alphanumeric characters. Refer to subsection 3.4.4 for selecting the
alternative keyboards.
To edit a string:
1.
Touch the Operator input text to select the character(s) that need(s) to be changed.
2. Enter the desired new character(s). The desired character(s) is (are) inserted at the cursor position.
3. Repeat the previous instructions until all the characters have been edited or entered.
4. To delete characters, select the characters that need to be deleted and touch Backspace . Alternatively,
place the cursor behind the characters that need to be deleted and touch Backspace to remove
character by character.
5. Touch Enter to confirm the Operator input.
1. User prompt text
2. Operator input
3. Keyboard