SAFETY
H325 IAE
Rev.: 004
kortho
QiC i-series
4-3
If the label needs to be downloaded through a USB thumbdrive one should set the driver accordingly, see
Downloading a label through USB
,
Installation of the driver
. The description below is based on the
situation in which the label is send to the printer through the Ethernet.
Before a label be downloaded through a USB thumbdrive it needs to be printed to a Printfile (*.prn). It is not
possible to download the original label file to the printer.
To guarantee a good print result it is important that the label is designed for the printer to which one would
like to download the label.
4.1.4 Notes
All external equipment that is connected to the control unit interface must be double insulated to
qualify the whole installation as a separated extra-low voltage (SELV, Class II) system.
Refer to Appendix D, Connections, for the connection options.
Printing the Grid test label with a low density setting (e.g. 10%) makes it easier to see if the printhead
is level with the platen.
When the system parameter
Start paused
is set to
No
, the printer will start printing as soon as the print
engine is powered up and a print request is received. The print engine is active before the Main menu
is shown. Refer to subsection 8.6.1.
During the boot process the
Screen calibration
screen will be shown. Do not touch this screen unless the
screen calibration of the control unit is incorrect. Refer to section 9.3.
If a print request is received during the pause mode, a popup will appear on screen, showing “Error
44: the printer is paused. Start the print process to continue.” .
The directories that are stored on the USB thumbdrive are shown in pink, while the directories that
are stored in the label memory are shown in yellow.
The status LED will turn orange.
The print engine is ready to print before user interface has completely booted. As soon as the print
engine is ready the printer will make a print as soon as a print request signal is applied.
Using this option will decrease the number of prints per minute (PPM) because it takes time to push
the printhead carriage back into the home position. Once the carriage is pushed back for the set
amount of milliseconds, the system will make the print.
When the print queue contains a print request, this print request will be excecuted directly after the
current print has been made. When multiple print requests come in during a print cycle, only 1 will be
stored in the print queue. The others are simply disregarded. This in turn implies that the Print missed
error or warning is not active when the print queue is activated
.When there are more languages than fit on screen, on can touch the screen and drag up and
downwards to select the required language.
To view errors 4 to 10 touch the screen and drag the messages upwards. This will scroll them into
view.
If an error occurs more than once, sequentially, the error will only be displayed once. The amount of
times an error has occurred sequentially will be mentioned between brackets, e.g. see Error 5 in Fig.
9.8.
The printer is supplied with a set of internal fonts installed. The fonts shown in the picture above are
the pre-installed fonts. These fonts can be replaced by other fonts using QiC Draw.
Содержание qic i series
