Kortho H210 AM, Руководство пользователя

Страница: 6 / 39

Kortho
Hot Quickcoder User Manual
6
1 GENERAL INSTRUCTIONS BEFORE USE
You should read through this user's manual carefully before putting the Hot Quickcoder into use for
the first time. Follow the order indicated precisely when carrying out any of the actions described in
this manual.
Pay particular attention to all stated warnings!
1.1 Liability
bv korthofah accepts no liability for damage resulting from the improper or uninformed use of the
equipment or caused by maintenance or other work being carried out improperly. They also accept no
liability for the normal wear-and-tear of the product.
1.2 Life Span
The life span of the equipment is ten years with normal use and compliance with the indicated
maintenance periods. The life span can be negatively influenced if original parts are not used for
repairs. All claims to a guarantee or compensation for damages do not apply in such an instance.
The Hot Quickcoder does not contain any harmful substances or materials and can be scrapped or
recycled at the end of its life span.
The Hotrolls should be treated as small chemical waste.
N.B. The above statement is based on the legislation in force as at mid 1995.
1.3 Normal use
Normal use means use under normal conditions i.e. stamping pressure, time and temperature set
within the margins indicated in this User Manual.
1.4 Environment
The environment in which the Hot Quickcoder may be installed must comply with a number of
requirements relating to humidity, temperature and vibrations.
The relative humidity should be between 0 and 85% (non-condensing).
The ambient temperature should be between 5 and 40°C.
The Hot Quickcoder may not be used in any areas having a fire or explosion hazard.
The Hot Quickcoder should be installed in a low vibration location.
1.5 Operational Personnel
Operating personnel are required to be informed by means of instruction as to the functioning of the
equipment. They also need to be informed about the tips and warnings stated in this manual. A
specific preliminary training is not required.
Personnel carrying out repairs and technical maintenance on the equipment should have a secondary
technical education or a comparable technical level of knowledge through practical experience.