Kortho H210 AM, Руководство пользователя

Страница: 17 / 39

Kortho
Hot Quickcoder User manual
17
7 THE HOT QUICKCODER DURING USE
7.1 Changing a text head
Texts can be changed particularly quickly by changing the text head.
1. Stop the supply of products.
2. Remove the product under (or in front of) the HQC or turn the HQC in its entirety away from
the belt.
3. Activate the HEAD-OUT button on the Control Panel.
4. Twist the handle into the text head.
5. Use the handle to extract the text head from the text head holder.
6. Use the handle to position the (new) text head in the text head holder (check for blockages).
7. Twist the handle out of the text head.
8. Activate the HEAD-IN button on the Control Panel. This moves the text head back into
neutral position.
9 Allow the new text head to reach operating temperature (approx. 2 minutes).
10. Replace the product under (or in front of) the HQC or turn the HQC in its entirety back
towards the belt.
11. Start the supply of products.
7.2 Replacing the Hotroll
If the print becomes less legible, the Hotroll should be replaced. Replace the used roll with a roll
which has already been brought up to the correct temperature in the preheating chamber of the HQC.
1. Activate the STOP button on the Control Panel.
2. Stop the supply of products;
3. Activate the HEAD-OUT button on the Control Panel;
4. Extract the used Hotroll from the coding part of the HQC;
5. Remove the new Hotroll from the preheating chamber;
6. Slide the new Hotroll into the coding part of the HQC; the cartridge must be pushed in until it
clicks;
7. Replace the removed product under (or in front of) the HQC;
8. Activate the HEAD-IN button on the Control Panel;
9. Activate the START button on the Control Panel.
10. Restart the supply of products;
11. Place a new Hotroll in the preheating chamber.
!
WARNINGS:
Failure to follow the rules below when replacing a Hotroll leads to damage to the text material, the Hotroll
and the HQC itself!
The temperature of the text head is approximately 120°C!
!
WARNINGS:
If the text head is removed during normal operation, it's temperature is approximately 120°C!
Failure to remove the handle from the text ead can damage the HQC.