Kontron KFM19_e Скачать руководство пользователя страница 8

Страница: 8 / 43

Safety

Instructions

19" Industrial LCD Monitor KFM19_e – User’s Manual (Version 1.10)

❏

Only devices and components which fulfill the requirements of a SELV circuit

(Safety Extra Low Voltage) in accordance with EN 60950 may be connected

to the interfaces of the system.

❏

All plugs on the connection cables must be screwed or locked to the housing.

❏

The device is designed to be used in vertical position.

❏

Repairs may only be carried out by a person authorized by Kontron

Embedded Computers.

❏

Maintenance or repair on the open device may only be carried out by qualified

personnel authorized by Kontron Embedded Computers familiar with the

associated dangers.

❏

It is not allows to open the device.

❏

Only approved original accessories approved by Kontron Embedded

Computers may be used.

❏

It must be assumed that safe operation is no longer possible,

•

if the device has visible damage or

•

if the device no longer functions.

In these cases the device must be shut down and secured against

unintentional operation.

Содержание KFM19_e












































Результаты поиска

Содержание KFM19_e

Отзывы:

Бренды по названию

Популярные бренды

Kontron KFM19_e, Руководство пользователя

Результаты поиска

Содержание KFM19_e

Отзывы:

Бренды по названию

Популярные бренды