manualshive.com logo in svg

Kontron KFM19_e, Руководство пользователя

Поделиться
Скачать
Kontron KFM19_e Скачать руководство пользователя страница 15

Product Description 

 

“On/Off” Button and Status LED 

“On/Off” 
Button 

Press this button, in order to switch on or off the monitor 

KFM19_e. 

 

 

Even if you switch the monitor off with the “On/Off” button, a 

standby voltage is further present in the device. 

The unit is complete disconnected from the power source, only 

when the power cord is disconnected from the power source. 

Therefore the power cord and its connectors must always 

remain easily accessible. 

 

Status LED 
(green) 

Lights up green when the device is switched on by pressing of 

the “On/Off” button and a video signal is present at the selected 

video input. 

Prerequisite:   

The power cord must be connected to a corresponding power 

source. 

Status LED 
(orange) 

Lights up orange, when the monitor is switched off or no video 

signal is present at the selected video input. 

Prerequisite:   

The power cord must be connected to a corresponding power 

source. 

 

 

If this LED does not light up after turning on the device, then 

you must check the main power source and the presence of the 

video signal at the monitor video signal input. 

 

On Screen Display Buttons 

The OSD buttons allow you to select, to scroll, to install in the OSD main menu or 

OSD submenu (refer to the “On Screen Display (OSD)” chapter. 

14 

19" Industrial LCD Monitor KFM19_e – User’s Manual (Version 1.10) 

Содержание KFM19_e












































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды