Monitor Connecting and Turning On
Monitor Connecting and Turning On
The industrial LCD monitor KFM19_e can be connected to IBM PC systems
equipped with corresponding graphics capability.
1.
Connect the PC system’s video signal output interface to the video signal
input of the KFM19_e using the supplied video signal cable (depending on
your ordering).
2.
If your KFM19_e is equipped with touchscreen (with COM or USB connection)
you have to connect the touchscreen to the corresponding interface of the PC
system using the supplied touchscreen cable connector.
3.
Connect the power cord as described in the “Power Cord Connection”
chapter.
4.
Push the “On/Off” button to turn on the monitor.
The PC should be set to an appropriate graphics mode that has the
same resolution with the LCD panel to have a clear screen image.
The colour representation of the image on each monitor can differ
by physically causes and is dependent on the video signal
source.
If you prefer another colour temperature or want to adapt the
colour representation of images on two monitors, you have to
install these features in the OSD menu under “Color”.
Execute these settings only after reaching of the full operating
temperature of the monitor (approx. 30 minutes).
When the screen is not in use, it must be turned off or the pattern
must be frequently changed by a screen saver.
If it displays the same pattern for a long period of time, brightness
down or “image sticking” may develop due to the structure of LC-
Displays.
19" Industrial LCD Monitor KFM19_e – User’s Manual (Version 1.10)
27
Содержание KFM19_e
Страница 1: ......
