manualshive.com logo in svg

Kontron KFM19_e, Руководство пользователя

Поделиться
Скачать
Kontron KFM19_e Скачать руководство пользователя страница 6

 Important 

Instructions 

19" Industrial LCD Monitor KFM19_e – User’s Manual (Version 1.10) 

5 

Important Instructions 

This chapter contains instructions which must be observed when using your 

industrial LCD monitor KFM19_e. 

The manufacturer’s instructions provide useful information on your industrial LCD 

monitor KFM19_e.  

 

Note on the Warranty 

Due to their limited service life, parts which, by their nature, are especially subject 

to wear (wearing parts) are not included in the guarantee beyond the legal 

stipulations. This applies to the display backlighting, for example. 

 

Exclusion of Accident Liability Obligation 

Kontron Embedded Computers shall be exempted from the statutory accident 

liability obligation if the user fails to observe the safety instructions. 

 

Liability Limitation / Exemption from the 

Warranty Obligation 

In the event of damage to the device caused by failure to observe the hints in this 

manual and eventually on the device (especially the safety instructions), Kontron 

Embedded Computers shall not be required to honor the warranty even during the 

warranty period and shall be exempted from the statutory accident liability 

obligation. 

 

 

Содержание KFM19_e












































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды