Product Description
4.
Loosen the two slotted pan head screws of the DC plug terminal far enough
so that you can insert the end of the power cord.
1
2
3
4
Fig. 11: Phoenix plug terminal with positive and negative voltage wire (example)
1
Phoenix plug terminal
2
Slotted pan head screws
3
Negative voltage wire (black)
4
Positive voltage wire (red)
5.
Insert the negative and positive voltage wire into the corresponding clamp of
the Phoenix plug terminal. Make sure that you have the right polarity of the
connection (see Fig: 10a).
6.
Fasten the screws to secure the negative and positive voltage wire into the
clamps of the plug terminal.
The second end of each wire will be prepared as required for the
connection to the DC power supply.
Connect the KFM19_e to the DC power source as follows:
1.
Plug the one end of the DC cable connection (Phoenix plug terminal) to the
Phoenix plug of the KFM19_e.
2.
Connect the other end of the DC cable connector to a corresponding DC
power source.
24
19" Industrial LCD Monitor KFM19_e – User’s Manual (Version 1.10)
Содержание KFM19_e
Страница 1: ......
