Kontron KFM19_e Скачать руководство пользователя страница 7

Страница: 7 / 43

Safety Instructions

Safety Instructions

Please read this section carefully and observe the instructions for your own safety

and correct use of the device.

This chapter also contains information on approval and interference suppression

of your device.

Please observe the warnings and instructions on the device and in the manual.

The industrial LCD monitor KFM19_e has been built and tested by Kontron

Embedded Computers in accordance with EN 60950/VDE 0805 and left the

company in a perfectly safe condition.

In order to maintain this condition and ensure safe operation, the user must

observe the instructions and warnings contained in this manual.

❏

The device must be used in accordance with the instructions for use.

❏

The electrical installations in the room must correspond to the requirements of

the respective regulations.

❏

Take care that there are no cables, particularly power cables, in areas where

persons can trip over them.

❏

Do not use a power cable in sockets shared by a number of other power

consumers. Do not use an extension cable.

❏

Only use the power cord supplied.

❏

The unit is only completely disconnected from the power source when the

power cord is disconnected from the power source. Therefore the power cord

and its connectors must always remain easily accessible.

❏

Do not place the device in direct sunlight, near heat sources or in a damp

place. Make sure the device has adequate ventilation.

19" Industrial LCD Monitor KFM19_e – User’s Manual (Version 1.10)

Содержание KFM19_e












































Результаты поиска

Содержание KFM19_e

Отзывы:

Бренды по названию

Популярные бренды

Kontron KFM19_e, Руководство пользователя

Результаты поиска

Содержание KFM19_e

Отзывы:

Бренды по названию

Популярные бренды