KBox A-103 – User Guide, Rev. 3.0
// 68
The following table shows Main sub-screens and functions, and describes the content. Default settings are in bold.
Table 27: Main Setup Menu Sub-screens
Sub-Screen
Function
Second level Sub-Screen / Description
System Date>
Set the system date
[mm/dd/yyyy]
System Time>
Sets the system time
[hh:mm:ss]
System
Information>
Read only field
Displays System Information
BIOS Version, Build Time, Processor Type, Processor Speed, System Memory Speed, L2 Cache
RAM Total Memory (DIMM 1, DIMM2)
Boot Features>
NumLock>
Selects Power-on state for NumLock.
[On/Off]
Timeout>
Number of seconds that P.O.S.T will wait for the user input
before booting (0 - 99)
[1]
CSM Support>
Compatibility Support Module that provide backward
compatibility services for legacy BIOS services, like
int10/int13, dependent OS.
[No, Yes]
Quick Boot>
Enable/Disable Quick Boot.
[Disabled, Enabled]
Dark Boot>
Enable/Disable Dark Boot.
[Disabled, Enabled]
Diagnostic Splash Screen>
If you select ’Enabled’ the diagnostic splash screen always
displays during boot. If you select ’Disabled’ the diagnostic
splash screen does not display unless you press HOTKEY
during boot.
[Disabled, Enabled]
Diagnostic Summary Screen>
Display the Diagnostic summary screen during boot.
[Disabled, Enabled]
BIOS Level USB>
Enable/Disable all BIOS support for USB in order to reduce
boot time. Note that this will prevent using a USB
keyboard in setup or a USB biometric scanner such as a
finger print reader to control access to setup, but does
not prevent the operating system from supporting such
hardware.
[Disabled, Enabled]
Allow Hotkey in S4 resume>
Enable hotkey detection when system resuming from
Hibernate state
[Disabled, Enabled]
UEFI Boot>
Enable the UEFI boot.
[Disabled, Enabled]
Legacy Boot>
Enable the Legacy Boot.
[Disabled, Enabled]