KBox A-103 – User Guide, Rev. 3.0
// 32
4.7.2.
Rear Side View of the KBox A-103 as Desktop Unit or with Wallmount Bracket
Depending on the ordered system configuration, the KBox A-103 (desktop unit or with horizontal/vertical wallmount
brackets) can be equipped with the WLAN option with 3 antennas and/or with the GPIO option (Figure 20). If no
options were ordered the location for the WLAN antennas and for the GPIO-port are corresponding covered as shown
in Figure 19, pos. 1 and pos. 4.
Figure 19: Rear side of the KBox A-103 without optional WLAN and GPIO (shown as desktop unit)
Figure 20: Rear side of the KBox A-103 with optional WLAN and GPIO (shown with vertical/horizontal mounting
brackets)
1
Covered cutout for the Reverse (RP) SMA connector of
the WLAN antennas (mPCIe WLAN card with 3
antennas is an option)
2
Cooling fins on the top side of the chassis
3
Rubber feet
4
Not installed GPIO interface (option)
5
Countersunk screws M3x8 ISO14581 torx
6
Wall/table mount brackets with key holes (left and
right) for horizontal or vertical (with interface sides
downwards or upwards) mounting position
7
Installed GPIO option
8
Reverse (RP) SMA connectors for the WLAN
antennas
1
2
4
3
3
1
5
5
8
2
7
6
6
8
5
5
