KBox A-103 – User Guide, Rev. 3.0
// 75
Sub-Screen
Function
Second level Sub-Screen / Description
South Cluster
Configuration>
(continued)
USB
Configuration>
(continued)
USB1 Power
Enable>
USB1 Power Enable or Disable
[Disabled, Enabled]
USB2 Power
Enable>
USB2 Power Enable or Disable
[Disabled, Enabled]
USB3 Power
Enable>
USB3 Power Enable or Disable
[Disabled, Enabled]
USB0 Wake
Enable>
USB0 Wake Enable or Disable
[Disabled, Enabled]
USB1 Wake
Enable>
USB1 Wake Enable or Disable
[Disabled, Enabled]
USB2 Wake
Enable>
USB2 Wake Enable or Disable
[Disabled, Enabled]
USB3 Wake
Enable>
USB3 Wake Enable or Disable
[Disabled, Enabled]
USB 0
Host/Client
Mode>
Select USB0 Host or Client mode
[Host Mode, Client Mode]
Audio
Configuration>
Audio
Controller>
Control Detection of the HDAudio device.
Disabled = Azalia will be unconditionally disabled
Enabled = Azalia will be unconditionally enabled
[Disable, Enable]
HDAudio VCi
Enable>
Enable/Disable Virtual Channel 1 of Audio Controller
[Disable, Enable]
HDAudio Docking
Support Enable>
Enable/Disable HDAudio Docking Support of Audio
Controller
[Disabled, Enabled]
HDAudio PME
Enable>
Enable/Disable Power Management capability of Audio
Controller
[Disable, Enable]
HDAudio HDMI
Codec>
Enable/Disable internal HDMI codec for HDAudio
[Disable, Enable]
SATA Drives>
Chipset-SATA>
Enables or Disables the Chipset SATA Controller. The
Chipset SATA controller supports the 2 black internal
SATA ports (up to 3Gb/s supported per port).
[Enable, Disable]
SATA Test Mode> Test Mode Enable/Disable
[Enable, Disable]
Chipset SATA
Mode>
IDE: Compatibility mode disables AHCI support.
AHCI: Supports advanced SATA features such as Native
Command Queuing.
Warning: OS may not boot if this setting is changed after
OS install.
[IDE, AHCI]
SATA Port 0 Hot
Plug Capability>
If enabled. SATA port will be reported as Hot Plug
capable.
[Enable, Disable]