PRESFIX ALPHA
Pressurisation Set
1
Operating and Maintenance Instructions
Declaration of conformity
Lowara pumps UK declare that the Presfix pressurisation set conforms to the requirements of the Machinery
Safety Directive
89/392/EEC.
Conforming to the UK Health & Safety Requirements
S.I. 1992 No 3073 S.I. 1994 No 2063
Water supply (Water fittings) regulations
1999
Simple pressure vessel directive
87/404/EEC
Code of practice for heating and chilled water systems
BS7074 (parts 1, 2 & 3)
Signed:
Position:
Engineering manager
Date:
03-02-12 Revision B
Clive Willmot
t
Introduction
This leaflet contains information to enable the safe installation and operation of the products mentioned above.
The following instructions must be read and understood by all persons responsible for the installation, operation
and maintenance of this product.
Warning Symbols
Safety instructions where noncompliance would affect safety.
Safety instruction where electrical hazard is involved.
Safety instruction where noncompliance could cause damage to the equipment.
Instruction for safe use
This product has been designed for the pressurisation of sealed heating, chilled water and closed-
condenser water systems to the operating conditions shown.
This product should not be installed until this leaflet has been studied carefully.
Handling, transportation and installation of this equipment should only take place with the proper
use of lifting equipment.
This product must be stored in a frost-free dry environment.
Noise Emissions
This equipment operates at a noise level lower than 70dBA.
presfix alpha REV B o and m instructions:Layout 1
09/05/2012
15:49
Page 1
