24 Appendix B: BIOS Operation
Kontron User's Guide EPIC/CE
83
The following table shows a list of supported devices:
Device
Description
IDE 0
Primary master IDE hard drive
IDE 1
Primary slave IDE hard drive
IDE 2
Secondary master IDE hard drive
IDE 3
Secondary slave IDE hard drive
IDE CD
IDE compatible CD-ROM drive
Legacy Floppy Drives
Standard Legacy Diskette Drive
USB KEY
USB stick
USB FDC
USB Diskette Drive
USB HDD
USB Hard Drive and memory sticks that follow MMS specification
USB CDROM
USB CD-ROM Drive
USB ZIP
USB ZIP Drive
USB LS120
USB LS120 Drive
PCI BEV
Ethernet Controller on the PCI Bus with LAN Boot ROM
PCI SCSI
SCSI Controller on the PCI Bus with SCSI BIOS ROM
24.7.2
Boot First Function
Display the Boot First function by pressing <Esc> during POST. In response, the BIOS displays the
message Entering Boot Menu and then displays the Boot Menu at the end of POST. With the MultiBoot XP
feature only devices detected during boot-up are displayed.
Use the menu to select a following option:
®
Override the existing boot sequence (for this boot only) by selecting another boot
device. If the specified device does not load the OS, the BIOS reverts to the previous
boot sequence.
®
Enter Setup.
®
Press <Esc> to continue with the existing boot sequence.
Содержание EPIC/CE
