Kontron EPIC/CE Скачать руководство пользователя

Страница: 12 / 101

3 Getting started

Kontron User's Guide EPIC/CE

Getting started

Getting started with the EPIC/CE is very easy. Take the following steps:

Turn off the power supply.

Connect the power supply to the EPIC’s power supply connector. The board is
available in an AT- (5V-only) or an ATX-version.

Plug a memory module into the memory socket of the EPIC.

Connect the CRT monitor to the CRT interface or a LCD panel to the JILI interface by
using a corresponding adapter cable.

Plug the keyboard and the mouse to the PS/2 connectors.

Connect the floppy drive cable to the EPIC’s floppy interface. Attach the floppy drive
to the connector at the opposite end of the cable.

Connect the power supply to the floppy’s power connector.

Plug a hard-drive data cable to the EPIC’s hard-disk interface.

Attach the hard disk to the connector at the opposite end of the cable.

Connect the power supply to the hard disk’s power connector.

If required, plug the PC/104 and PC/104-Plus extension cards to the buses.

Make sure all your connections have been made correctly.

Turn on power.

Enter the BIOS by pressing the F2 key during boot-up. Make all changes in the BIOS
setup. See the BIOS chapter of this manual for details.

Содержание EPIC/CE






































































































Результаты поиска

Содержание EPIC/CE

Отзывы:

Похожие инструкции для EPIC/CE

Бренды по названию

Популярные бренды

Kontron EPIC/CE, Руководство пользователя

Результаты поиска

Содержание EPIC/CE

Отзывы:

Похожие инструкции для EPIC/CE

Бренды по названию

Популярные бренды