COMe-bEP7 Module User Guide
www.kontron.com
// 84
12.4.2.
AMD PBS Sub-Menu
Table 31: AMD PBS Sub-Screens
Sub-Screen
Description
General information:
This menu is used to configure PCIe lanes available to the carrier board (PCIe0 to
PCIe31), with the exception of the PCIe8 to PCIe15 lanes that are not available if CPU is
SP4r2 (Single Die).
In this section, x refer to a numeric value representing a PCIe lane.
The PCIe lanes configuration needs to be set for the carrier’s configuration.
Link Width at PCIEx>
Number of PCIe lanes for Link starting at COMe PCIEx.
[Disabled, x1, x2, x4, x8, 16x]
PCIEx – Link Speed>
Root Port PCIe Link Speed.
[Max Speed , PCIe Gen1, PCIe Gen2]
Additional information:
AMD EPYC® Embedded 3000 max PCIe speed is Gen3
12.4.3.
Configuration Sub-Menu
Table 32: Configuration Sub-Screens
Sub-Screen
Description
iSCSI Initiator Name>
Enter the worldwide unique name of iSCSI initiator. Only IQN
format is accepted with a range from 4 to 223.
12.4.4.
Intel (R) I210 Gigabit Network Connection
Table 33: Intel (R) I210 Gigabit Network Connection Sub-Screens
Sub-Screen
Second Level Sub-screen/Description
Firware Image
Properties>
Read only fields.
Option ROM version, Unique NVM/EEPROM ID, NVM Version.
NIC Configuration>
Configure the Network device port
Link Speed>
[Auto Negotiated , 10 Mbps Half, 10 Mbps
Full, 100 Mbps Half, 100 Mbps Full]
Wake On LAN>
Enables or disables power on of the
system via LAN.
[Disabled, Enabled]
Blink LED>
Identify the physical Network port by blinking the
associated LED. (Range: 0 -15)
Содержание COMe-bEP7
Страница 1: ...USER GUIDE COMe bEP7 Module Doc Doc ID BEP7M102...
Страница 2: ...COMe bEP7 Module User Guide This page has been intentionally left blank...
Страница 27: ...COMe bEP7 Module User Guide www kontron com 27 Figure 2 Bottom View of COMe bEP7 5 2x COMe interfaces...
Страница 52: ...COMe bEP7 Module User Guide www kontron com 52 HOT Surface Do NOT touch Allow to cool before servicing...
