COMe-bEP7 Module User Guide
www.kontron.com
// 109
Kontron uEFI BIOS does not provide all shell commands described in the EFI
Shell Command Manual.
12.10.1.
Basic Operation of the uEFI Shell
The uEFI Shell forms an entry into the uEFI boot order and is the first boot option by
default.
12.10.1.1.
Entering the uEFI Shell
To enter the uEFI Shell, follow the steps below:
1.
Power on the board.
2.
Press the <F7> key (instead of <DEL>) to display a choice of boot devices.
3.
Choose ‘UEFI: Built-in EFI shell’.
EFI Shell version 2.40 [5.11]
Current running mode 1.1.2
Device mapping table
Fs0
:HardDisk - Alias hd33b0b0b fs0
Acpi(PNP0A03,0)/Pci(1D|7)/Usb(1, 0)/Usb(1, 0)/HD(Part1,Sig17731773)
4.
Press the <ESC> key within 5 seconds to skip ‘startup.nsh’ script (if present), and
any other key to continue.
The output produced by the device mapping table can vary depending on the
board’s configuration.
If the <ESC> key is pressed before the 5 second timeout elapses, the shell prompt is
shown:
Shell>
12.10.1.2.
Exiting the uEFI Shell
To exit the uEFI Shell, follow one of the steps below:
1.
Use the
exit
uEFI Shell command to boot the next device in the Boot menu, or
return in BIOS Setup if no boot device detected.
2.
Reset the board using the
reset
uEFI Shell command.
12.11.
uEFI Shell Scripting
Содержание COMe-bEP7
Страница 1: ...USER GUIDE COMe bEP7 Module Doc Doc ID BEP7M102...
Страница 2: ...COMe bEP7 Module User Guide This page has been intentionally left blank...
Страница 27: ...COMe bEP7 Module User Guide www kontron com 27 Figure 2 Bottom View of COMe bEP7 5 2x COMe interfaces...
Страница 52: ...COMe bEP7 Module User Guide www kontron com 52 HOT Surface Do NOT touch Allow to cool before servicing...
