17
TRADITIONELLE DEUTSCHE QUALIT
AT
· ·
Starting and stopping the engine
Before starting the engine, make sure the switch is in position
I
(on). Turn the rotary
engine speed dial to
MAX
(see picture 12). Damper motor switch to position
CHOKE
.
Grasp the starter handle and slowly pull it to the emergence of resistance, then sharp fast
motion pull starter all the way. Repeat the operation until the engine starts. After starting
the engine let the rope to entangle on trigger without throwing the starter handle. Put
the flaps in position
RUN.
To eliminate the engine turn the switch to
O
(Off.) position.
The Throttle Adjustment
Clutch transmits engine from the engine to the transmission torque. When you
press the handle grip, rotation turns on and belt movement is transmitted to the
chain transmission. Transport the tiller to plowing land. Start the engine and
turn the required forward speed of the assisted lever gearbox. After pressing and
holding the lever, tiller starts to bury into the ground while moving forward.
Adjust the height of the depression in the ground with opener.
Pic. 12
Throttle governor
Extinguish switch
OFF
ON
Starting grip
