19
TRADITIONELLE DEUTSCHE QUALIT
AT
· ·
MAINTENANCE
In order to prevent unintentional inclusion of the engine, disconnect the spark plug of
the engine when storaging device, transportation and all the works on cleaning and
maintenance (such work is permitted only with cooled engine).
The use, storage and maintenance of Könner & Söhnen tillers must be made
according to this manual. For all the damage and malfunctions, which were caused
by mishandling of service, safety and working with the machine manufacturer is not
responsible.
The manufacturer is not liable for:
- Using of lubricants, gasoline and motor oil, whichare prohibited by supplier;
- Using the device for other purposes;
- Losses due to further use of faulty tiller parts;
- Technical changes of the device.
Maintenance work
All works shown in «maintenance» section should be done regularly. If you can not
perform work, tiller user should contact the service center to complete an application
for technical works execution.
In case of losses due to injury, acquired as a result of outstanding maintenance, the
manufacturer is not responsible.
These damages also include:
- Damage and losses resulting from the use of non-original spare parts;
- Corrosive damage and other consequences of invalid storage;
- Damage caused by the maintenance works that were carried out by unauthorized
personnel.
Cultivator cleaning
Thorough cleaning and care of the device extends its life and protecting it from
damage. After each use, clean the tiller blades of the land, dust and grass straw. Keep
under control the state of the product - damaged parts, landing threaded elements. It
is forbidden to send jets of water on the seals, engine components and bearing seats.
Otherwise the tiller may need an expensive repair.
