20
TRADITIONELLE DEUTSCHE QUALIT
AT
· ·
Chain transmission regulation
Occasionally, after extended tiller use, regulation of chain transmission is necessary.
To do this, follow these steps:
1. Remove the chain transmission, previously removing its screw.
2. Grip the handle grip. Check the distance between the upper point of the belt and
upper-point of roller - it should be 60 - 65 mm (2.4 -2.5 inches).
3. Remove four engine mounting bolts for work on regulation. Move engine
forward or backward the required belt tension and make sure that the external
surfaces of driving and driven pulleys are in the same plane.
Changing and adding fuel to the engine
Follow the maintenance schedule and regularly check the oil level in the engine. By
reducing the oil level is necessary to add new oil to ensure proper operation of the
engine. To replace the oil, follow these steps:
1. Make sure that the tiller is placed on a flat surface.
2. Place the capacity to drain the oil under tiller engine.
3. Unscrew the drain cover, located under the hood oil probe, using allen key 10
mm.
5. Wait until the oil drains.
6. Replace the cover and tighten the drain.
Minimum level
Maximum level
Oil tank cap
Tensionroller
