16
TRADITIONELLE DEUTSCHE QUALIT
AT
· ·
кришка фільтру
елемент фільтру
налийте 50-100 мл
оливи
OPERATION INSTRUCTION
Commissioning
1. To determine the depth of processing, set
the drag bar at different height. When deep
establishing of a drag bar, blades also go
deep into the soil and promoting the device
forward significantly slows.
2. The velocity is determined with the control
of engine speed. Blades go deeper into the
ground while keeping your device working.
3. To accelerate the advancement of the tiller,
set the drsg bar forth above, so the blades will
rise.
4. Dry and hard soil may contain large lumps of soil and probably will need two
passes. Do not work with moist soil, because it is difficult to break.
5. Immediately release the clutch lever if the tiller is blocked with foreign things.
Turn off the engine, remove barriers and check harrow lack deformation and
damage. If necessary, replace damaged parts.
Fuel and engine oil
The tiller needs normal unleaded fuel with 92 octane for proper work. Gasoline
should be fresh, vintage variety. Use a funnel (not supplied) for best device
filling.
The tiller also can not run without oil, so fill it before the first launch. Set the
device on a flat horizontal surface, open the tank with oil and pour oil to the
minimum mark. Use the probe to check the oil level. Oil level must be constantly
monitored. Do not let excess of oil and its lack. Information on used motor oil can
be found in the technical characteristics of the tiller.
Pic.11
