Konica Minolta SONIMAGE HS2, Руководство по эксплуатации

Страница: 32 / 308

Labels
32
CAUTION
Barcode reader
• Do not damage acrylic window of the barcode read-
er . Doing so may cause breakdown .
• Do not put heavy thing on the cable of the barcode
reader or close it to a heater . Doing so may cause
breakdown, an electric shock or a fire.
• Do not pour water or any liquid on the barcode
reader . Doing so may cause breakdown, an electric
shock or a fire.
• Do not use the barcode reader in a hot place; for
example, exposed to direct sunlight, or in front of a
heater . Doing so may cause breakdown, an electric
shock or a fire.
• Do not use the barcode reader in dust or high
humidity environment . Doing so may cause break-
down, an electric shock or a fire.
• Do not disassemble the barcode reader . Doing so
may cause breakdown .
• Do not give long-term vibration or intense impact
to the barcode reader . Doing so may cause break-
down .
• Do not leave the barcode reader in sudden chang-
es in temperature . Doing so may cause breakdown
or deformation of the casing .
• Do not wipe the barcode reader using chemical
agents . Doing so may cause breakdown .
• Do not connect the barcode reader to any connec-
tor other than USB connector of the system . Doing
so may cause breakdown .
• Do not look directly into a laser beam of the bar-
code reader .
• Do not disassemble and look inside of the barcode
reader . Doing so may cause damage to the eye .
• Do not connect multiple barcode readers to one
system . It causes the system to malfunction .
• Check that the patient information read by the bar-
code reader is correct .
CAUTION
Mini console switch configuration
• Do not press two or more switches on the mini
console simultaneously . System malfunction may
result . The operation of the USER LOG output func-
tion (refer to the "Operation Manual: Applications")
is excluded .
• The switch configuration on the mini console of this
system can be changed . The switch settings may
therefore differ depending on the system. Confirm
the switch configuration of your system before use.
• The descriptions in this operation manual are
based on the factory default switch configuration .
If the switch configuration has been changed, the
differences between the current configuration and
the default configuration must be understood before
use .
• The guaranteed operating angle of the trackball is
30 degrees or less with respect to the horizon . If
the angle is greater than that, do not use the track-
ball, just operate the touch panel or the push or dial
buttons of the mini console .