E-16
(19) Touch “END.”
(20) Touch “Exit” on the Service Mode screen.
(21) Perform the sending and receiving tests
between the Machine and either the store
which offers the service or the local retailer, to
check that it can be operated normally.
<Caution when performing dial transfer>
After setting the country code, dialing operations
may be selected after the switchboard dial tone is
detected depending on the destination. In this case,
depending on the switchboard connected to the
machine and the type of dial tone received from the
switchboard, dialing operations may not be avail-
able. If that happens, you may be able to avoid the
problem with the following setting.
<Turn the Dial Tone Detection function OFF>
(1) Display the Service Mode screen.
(For details of how to display the Service Mode
screen, see the service manual.)
(2) Touch “FAX.”
(3) Touch “Network.”
(4) Touch “Network Setting 2.”
(5) Touch “OFF” of Dial Tone Detection.
(6) Touch “END.”
(7) Touch “Exit” on the Service Mode screen.
<Setting the FAX (circuit 2)>
(1) Plug the power cord into the power outlet and
turn on the machine.
(2) Display the Service Mode screen.
(For details of how to display the Service Mode
screen, see the service manual.)
(3) Touch “System 2.”
(4) Touch “Option Board Status.”
(5) Touch “Set” of FAX (circuit 2).
(6) Touch “END” and touch “Exit.”
(7) Turn OFF and ON the power switch.
Note:
• When displayed the Service Mode screen, be
sure to turn OFF the power switch after exiting
the Service Mode screen and wait for 10 sec-
onds or more before turning ON.
• After turning ON the power switch, be sure to
conduct the following procedures in ‘FAX initial-
ization’ after confirming the message ‘Preparing
Scan/Fax...’ is turned off.
(8) Display the Service Mode screen.
(For details of how to display the Service Mode
screen, see the service manual.)
(9) Touch “FAX.”
(10) Touch “Line2.”
(11) Touch “Initialization.”
(12) Touch “Fax Function Parameter.”
(13) Touch “Yes.”
(14) Touch “Yes.”
(15) Touch “END.”
(16) Touch “Exit” on the Service Mode screen.
(17) Perform the sending and receiving tests
between the Machine and either the store
which offers the service or the local retailer, to
check that it can be operated normally.
<Caution when performing dial transfer>
After setting the country code, dialing operations
may be selected after the switchboard dial tone is
detected depending on the destination. In this case,
depending on the switchboard connected to the
machine and the type of dial tone received from the
switchboard, dialing operations may not be avail-
able. If that happens, you may be able to avoid the
problem with the following setting.
<Turn the Dial Tone Detection function OFF>
(1) Display the Service Mode screen.
(For details of how to display the Service Mode
screen, see the service manual.)
(2) Touch “FAX.”
(3) Touch “Line2.”
(4) Touch “Network.”
(5) Touch “Network Setting 2.”
(6) Touch “OFF” of Dial Tone Detection.
(7) Touch “END.”
(8) Touch “Exit” on the Service Mode screen.
