E-12
b) Remove the knockout from the rear right cover
using nippers.
c) Route the modular cable through the three wire
saddles.
d) Route the cable through the notch and attach
the rear right cover. (Two screws)
b. When the ferrite core is installed to the sup-
plied modular cable
(1) Connect the supplied modular cable in the mod-
ular jack (LINE) of the fax kit (Line 1).
Note:
If the user is connected with a key telephone sys-
tem or a private branch exchange (PBX), do not
connect the modular cable to where other than an
analog line.
(2) Following the steps given below, house the fer-
rite core of the modular cable in the machine.
a) Hook the cable.
b) Pass the cable wound around the ferrite core
through the protrusion.
a
b
