Basic Operating Tasks
AD3435_en
|
2017-11-17
2–3
Power
When the symbol is green, the power is on and the imager is ready to print.
•
The symbol flashes while the imager is processing, calibrating, or making a test
print.
•
When the symbol is amber, the imager is not ready to print. Examples are when
the imager has just been started, when a film cartridge is empty or jammed, and
when a cover is removed.
Calibrate and Test
Print
Calibration might be needed if the symbol is on and code 624, 631, or 632
appears. Press the symbol to calibrate the upper or lower film cartridge.
•
The symbol flashes while the calibration is in process, when making a test print
(upper or lower), and when you initiate a filter reset.
•
When amber, there is an error such as a failed calibration. The indicator light
associates the error code to the film cartridge. Depending on the issue, you may
be able to keep printing (631 or 632 error), or it might be necessary to load a
different film cartridge (624 error).
To make a test print, press and hold the Calibrate symbol for three seconds until
the imager beeps twice. The test print varies depending on the type of film.
Pause
Important
To avoid exposing the film to light, do not open the film supply door until the Pause
symbol is off. Wait until the symbol is off to replace a cartridge.
•
During most normal operation, including when the imager is idle, the symbol is
off.
•
The symbol is on while the imager is processing images, test prints, and during
calibration.
•
The symbol flashes when a film cartridge cover is in the process of being opened
(rolled back) or closed.
If the Pause symbol is on, you can press the symbol to temporarily pause printing.
Any jobs in progress finish printing, then the film cartridge cover closes. When the
Pause symbol turns off, you can open the film supply door.
Film Size
When this symbol appears, the requested print job requires a different film size
and/or type. The required film size/type flashes in the location of the error or status
code.
You can also press this symbol for three seconds, until the imager beeps twice, to
cancel all pending print jobs that require an unavailable media size and/or type.
Restart
Restart the imager. An error code also displays to indicate the reason for the
restart.
Symbol or code
Description
