Konica Minolta CM-2600d, Инструкция по эксплуатации

Страница: 53 / 127

E-51
Selecting a Color Difference Target Data
Selecting a Color Difference Target Data
To measure the color difference between two specimens, the target color to be used for measurement
must be selected from those set in “Setting a Color Difference Target Data”.
To select a target color, follow the procedure given below.
[Setting Procedure]
<COND * > screen
1
Turn
B
to select “TARGET”, then press
A
.
• “T*” is the number of the color difference target data for the next measurement. If nothing is selected,
“T---” appears.
• “T*” does not appear if “defined in COND.” mode is selected.
2
Turn
B
to select “
D
”, then press
A
.
“
D
” will change to “
E
”
.
3
Turn
B
to select the desired target color no. (T * ), then press
A
.
“
E
” will return to “
D
”
.
• Keeping
B
held down to left or right will cause the target color No. to change continuously.
4
<Performing Measurement>
Turn
B
to select “BREAK”, then press
A
.
The measurement screen will ap-
pear.