E-98
Connecting to an External Device
Printing Color Difference Target
M
emo
To print color difference target data, make sure that the instrument is connected to the printer with a printer cable.
N
ote
• The instrument and printer must be connected using a printer cable that is wired as shown in “Printer Cable
Wiring Diagram” (page E-92).
• Before connecting, make sure that the power to both the instrument and printer is turned OFF.
[Procedure]
This operation must be started from the <TARGET> screen.
1. Turn
B
to select “
D
”, then press
A
.
“
D
” will change to “
E
”.
2. Turn
B
to select the color difference target data to be printed, then press
A
.
“
E
” will return to “
D
”.
• Keeping
B
held down to left or right will cause the color difference target data No. (T
*
) to change
continuously.
3. Turn
B
to select “
”, then press
A
.
M
emo
• If “SPECT.GRAPH” has been selected as the display mode, spectral reflectance data will be printed.
• If a mode other than “SPECT.GRAPH” has been selected as the diaplay mode, only colorimetric value data
will be printed.
Содержание CM-2600d
