Konica Minolta bizhub 43, Руководство по обслуживанию

Страница: 85 / 232

- 5 - MG 3000329394 - 03
Code 02 - Burnt number
This code appears when all faxs sending trials have failed for this number (available only if SOS9 bit 6
is set to 1).
Code 03 - Stopped by operator
Communication stopped by the operator by pressing the key .
Code 04 - Programmed number invalid
Invalid single-key or quick-dial number: check the number (for example: a delayed transmission has
been programmed with a single key and the number corresponding to this key has been deleted).
Code 07 - Disconnect
The communication has been cut (bad connection). Check the call number.
Code 08 - Quality
The document that you have transmitted has not been received correctly. Contact your correspondent to
check whether it is necessary to retransmit the document: the interference may have occurred in an
unimportant area of the document.
Code 12 - Received document faulty
Ask the correspondent who calls you to check the length of his document (it is too long to be received in
its entirety).
Code 13 - Document transmission fault
Ask the correspondent who calls you to retransmit his document.
Code 15 - Incompatible coding
Recipient machine does not match with the send document’s encoding
Code 19 - Memory full
Your fax can no longer receive incoming documents because the memory is full: there are too many
documents that have been received but not yet printed, or there are too many documents waiting to be
transmitted.
Print the received documents, and delete or transmit in immediate mode the documents waiting to be
transmitted.
Code 20 - Print queue full
The print queue is full.
Code 25 - Stopped by correspondent
Communication stopped by your correspondent (for example, a fax attempts to recover a document
from your fax, while there is no document waiting for this correspondent).
Code 26 - Disconnect
Transmission has not started: the phone line is too noisy.
Code 27 - Document transmission fault
In the case of a transmission: restart the transmission.
In the case of a transmission: ask your correspondent to retransmit his document.
1.3.2 I
NTERNET CODES
Codes 64 - No reply from provider
The modem cannot connect to the service provider. If this is a systematic error, verify the phone
number of the service provider and (if applicable) the dialing prefix associated with the machine.