Konica Minolta bizhub 43, Руководство по обслуживанию

Страница: 49 / 232

- 15 - IG 3000361032 - 01
• Close the lid of the paper tray. Make sure that the lid of the tray is correctly closed.
• Replace the paper tray and push it completely into the terminal.
• Define the size and type of paper that are used on the terminal.
The terminal detect automaticaly the size of the standard paper. To check/define the size and
type of paper that are loaded, refer to the section Paper settings on the User guide.
3.2 L
OADING PAPER LARGER THAN
A4
SIZE IN THE PAPER TRAY
The following section describes how to load paper into all trays of the multifonction.
Remark(s): If the paper size is smaller than A4, see § Loading paper in the paper tray page 13 .
• Remove the paper tray and place it on a flat surface.
• Remove the lid of the tray.
• Slide the right and left lock tabs in the paper tray outwards to unlock them.