Kongsberg Simrad ES80, Руководство по установке, Страница: 257 / 312

416739/A
255
Supported datagram formats for depth information
The ES80 can export the depth information on several datagram formats. If enabled, the
current water depth is shown on the top bar.
The ES80 supports the following datagram formats for depth output:
•
NMEA DBS
The NMEA DBS datagram provides the current depth from the surface.
The datagram is no longer recommended for use in new designs. It is frequently replaced
by the NMEA DPT datagram format.
•
NMEA DBT
The NMEA DBT datagram provides the current depth under the transducer. In new
designs, this datagram format is frequently used to replace the DBK and DBS formats.
•
NMEA DPT
The NMEA DPT datagram provides the water depth relative to the transducer, and the
offset of the measuring transducer.
•
Atlas Depth
Atlas Depth is a proprietary datagram format created by Atlas Elektronik
(
https://www.atlas-elektronik.com ) to provide the current depth from two channels.
•
Simrad PSIMDHB
The proprietary Simrad PSIMDHB datagram format is created by Kongsberg Maritime
to contain the calculated bottom hardness and biomass information. The bottom depth
is given as DBS (depth below surface). It is assumed that correct transducer draft has
been provided.
Related topics
Interface specifications, page 247
Technical specifications, page 245
Technical specifications