Kongsberg Simrad ES80, Руководство по установке, Страница: 14 / 312

12
416739/A
Important
The ES80 is an advanced product. It is used with other advanced products. There is
important information that you need to know.
Note
The ES80 software supports several different transceiver units. This publication is mainly
intended for vessel installations of ES80 using the Wideband Transceiver (WBT).
Before you turn on the ES80
Before you turn on the ES80, make sure that the transducer is submerged in water. If you are
using a drop keel, make sure that you have sufficient water depth to lower it.
Caution
You must never set the ES80 to "ping" unless the transducer is submerged in water. Most
transducers are damaged beyond repair if they transmit in open air. Prevent inadvertent
use of the ES80 whenever a transducer is not submerged.
When the ES80 is not used
When you do not use the ES80, turn off the display and the Processor Unit. If you are not
using the ES80 for a long period of time, we recommend that you turn off the transceiver(s).
When you are docking your vessel
You must never turn on the ES80 when the ship is in dry dock. The transducer(s) may be
damaged if the ES80 transmits in open air. To prevent inadvertent use of the ES80, pull out
the mains plug on the Processor Unit whenever your vessel is in dry dock. Additional
precautionary measurers should be considered.
If something breaks down
If you believe that something has broken down, contact your local dealer. A list of all our
dealers is provided on our website.
• https://www.kongsberg.com
If you are unable to contact a dealer, observe the support information in this publication.
When you want to turn off the ES80
You must never turn off the ES80 by means of the on/off switch on the Processor Unit. You
must ALWAYS select
Exit
on the top bar.
Simrad ES80 Installation Manual