Kongsberg EM 710 Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 155

background image

Kongsberg EM 710

2.4 Supply conditions

2.4.1 Equipment responsibility

Upon receipt of the equipment the system owner or installation
shipyard automatically becomes fully responsible for the
equipment, unless otherwise stated in the contract. This
responsibility covers the storage period before installation, the
actual installation, commissioning, and the period between the
completion of the commissioning and the acceptance of the
equipment by the end user (normally the owner of the vessel or
platform into which the equipment is to be installed).

During the installation period the equipment must be covered in
such a way that it is protected from dust, paint spray/splashes and
welding/cutting sparks. Precautions must be taken to ensure that
no part of the equipment is used as a work platform, or for any
other purpose for which it was not designed.

Any damage incurred during the installation period, even with a
Kongsberg Maritime AS representative present, is the installation
shipyard’s responsibility unless it can be proven that the damage
was due to production or material defects in the equipment
delivered by Kongsberg Maritime AS, or irresponsibility by
Kongsberg Maritime AS personnel.

2.4.2 Project management

Project manager

Kongsberg Maritime AS will normally appoint a dedicated
project manager for the delivery project. The manager will
follow up the installation and delivery, and will be the installation
shipyard’s and end user’s point of contact.

Installation performed by Kongsberg Maritime

Kongsberg Maritime AS will assist during the installation if
specified in the contract or requested by the installation shipyard
or customer. Before any installation work by Kongsberg
Maritime AS can begin, all cables (at least those which are in
any way connected with the system) must be run and connected
to their respective terminations. These cables together with the
transducer installation will then be checked by the Kongsberg
Maritime AS engineers before they are used.

Depending upon the availability of electrical power either from
the generators on board or from ashore, the equipment related to
the system, and the various parts of the system will be tested
during the Setting to Work (STW) period. This requires that
interfaces to equipment delivered by other subcontractors are
ready for integration testing.

14

164851/C

«
...
14
15
16
17
18
...
»

Содержание EM 710




























































































































































Отзывы:

Нет отзывов

Похожие инструкции для EM 710

Бренд: Obdstar Страницы: 10

Бренд: Garmin Страницы: 2

Бренд: Xiitech Страницы: 6

SimMan 3G Trauma

Бренд: laerdal Страницы: 16

Бренд: laerdal Страницы: 16

Бренд: laerdal Страницы: 60

Бренд: laerdal Страницы: 4

Resusci Anne Simulator

Бренд: laerdal Страницы: 8

Nursing Baby VitalSim

Бренд: laerdal Страницы: 15

Бренд: Nellcor Страницы: 161

OXIMAX N-600X Series

Бренд: Nellcor Страницы: 210

Бренд: Oase Страницы: 120

Бренд: OAKWORKS Страницы: 24

Бренд: Jackson Страницы: 2

Бренд: Vag Страницы: 10

Cell Saver Elite+

Бренд: Haemonetics Страницы: 230

Бренд: Yacht Devices Страницы: 32

Tacx Boost Bundle

Бренд: Garmin Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды