34
UAB KOMFOVENT we reserve the right to make changes without prior notice
RHP PRO_22-01
EN
Fig. 35.
Surface-mounted return water temperature sensor
1
Fig. 36.
Return water temperature sensor with thread
2
B1 (11–12)
– terminal for a supply air temperature sensor (NTC 10kΩ) for controlling air temperature.
Fig. 37.
Supply air temperature sensor
For the most accurate temperature measurement, sensor in a duct must be installed after all heating/cooling devices at
least two duct diameters away from the nearest coil.
D
>2D
Fig. 38.
Installation of a supply air temperature sensor
1
Depending on the order.
2
Depending on the order.
