17
UAB KOMFOVENT we reserve the right to make changes without prior notice
RHP PRO_22-01
2. UNIT TRANSPORTATION
Units must be transported and stored in their original packaging. During transportation, units must be properly fixed
and additionally protected against possible mechanical damage, rain or snow. Only an employee qualified to operate a fork-
lift truck or crane and familiar with the principles of cargo lifting and safety requirements, must perform unloading or lifting
operations. When a forklift is used for lifting or transporting the unit, forks must be long enough to prevent the device from
tipping over or to avoid mechanical damage to its bottom part.
Max. 2 m
L
≥L
Max. 4 m
Fig. 12.
Unit transportation using a forklift or a trolley
Individual sections of the unit shall be lifted with an installation frame. Pipes should be inserted through the mounting
frame into designated openings and lifting ropes or belts fixed. It must be ensured that belts will not disconnect or pipes will
not be pulled out of the frame when lifting.
Max. 60°
Max. 60°
x2
Fig. 13.
Lifting of individual sections
1
1
Lifting means (pipes, belts, ropes, traverses) are not included.
