Komfovent KLASIK CF Series Скачать руководство пользователя

Страница: 9 / 32

UAB KOMFOVENT we reserve the right to make changes without prior notice

KBP2-18-10

2.3. Fan section

Depending on the required air flow and static pressure,

plug type fans or double inlet centrifugal fans with belt

drive are used in KLASIK series units. Fans are ba-

lanced statically and dynamically, based on ISO 1940

standard and correspond to class G2.5/6,3 (at maxi-

mum revs). Thus, even at maximum fan speed, vibra-

tion is minimal and is within all requirements.

Plug fans with EC motor

Highly efficient in all operating areas, EC motors are

available in all types of KLASIK units and correspond

to the IE4 premium efficiency level. High efficiency is

determined by low energy consumption, high efficien-

cy factor and the best values of the SFP factor. By us-

ing EC fans in Klasik units the following advantages

are achieved:

• extremely high efficiency up to 92%;

• valuable energy saving up to 30% comparing with

AC in some applications;

• integrated motor controller, no need for a frequency

converter;

• very smooth and silent operation;

• long-life;

• compact construction.

Plug fans with AC motor

Main advantages:

• high efficiency,

• smoothly adjustable productivity,

• good acoustic characteristics,

• durability.

The laminar stream after the fan wheel allows to

lower losses of pressure in a network; there is an op-

portunity to connect the device for measurement of a

stream of air.

Fans with backward curved

blades

Fans with forward curved

blades

The fan is connected to the casing by frame with vi-

broizolators. AC three-phase fan motors (400 V, 50 Hz)

are controlled by frequency converters.

Class of safety IP55 on IEC 34-5, windings of mo-

tors has isolation of a category “F”. Working tempera-

ture up to 40°C.

Double-inlet centrifugal fans with belt drive and with

backward curved blades feature particularly high ope-

rational stability, ensure high pressure, and their effi-

ciency ratio is 85%.

Fans with forward curved blades running at low speed,

have a low noise level and the efficiency to 70%.

Содержание KLASIK CF Series

































Результаты поиска

Содержание KLASIK CF Series

Отзывы:

Похожие инструкции для KLASIK CF Series

Бренды по названию

Популярные бренды

Komfovent KLASIK CF Series, Руководство по установке

Результаты поиска

Содержание KLASIK CF Series

Отзывы:

Похожие инструкции для KLASIK CF Series

Бренды по названию

Популярные бренды