Komatsu WA70-7, Руководство по эксплуатации и обслуживанию

Страница: 162 / 302

3.3 Operation Operation
3-88
WA70-7 – VENAM02003
Precautions for driving uphill or downhill
Turning on slopes, ridges, or embankments
Follow the instructions in section 3.3.5 “Turning and steering”
(3-71).
Braking on slopes
Follow the instructions in section “Braking on slopes” (3-73).
Precautions when driving
The tyres will become very hot if the machine is driven at high
speeds for an extended period of time with improper tyre pres-
sure. This is to be avoided, as it causes premature tyre wear.
Observe the following points when it is necessary to drive the
machine over a long distance:

Perform all checks before starting. For details
see 3.3 “Operation” (3-46).

Fasten any manual tools before starting to drive.

The required tyre pressure, the ground speed, and the type
of tyre vary depending on the road conditions. Contact your
Komatsu distributor or your tyre distributor for related infor-
mation.

See table “Tyres and tyre pressure” in chapter “Tyre pres-
sure” (3-96) for the proper tyre pressure.

Check the tyre pressure before starting to drive, when the
tyres are cold.

Lower the work equipment to the carrying position and tilt it
back fully.

Always drive with the bucket or forklift attachment empty.

Observe applicable traffic rules and drive carefully. Check
that the work lights and the warning beacon are off when
driving on roads.

Take a 30-minute break after each hour of driving. Check the
tyres and any parts exposed to high stress by road travel for
proper function and damages.