Komatsu WA470-7, Инструкция по сборке

Страница: 16 / 43

Adjustment of work equipment controller boom
angle
6
×
Assembly procedure
5
×
NO.0040
1-2. Adjustment of boom angle (LOWER)
②
Lower the boom to the lower limit (cylinder stroke end) and then press the ENTER switch.
①
Select [07 Boom Angle Sensor for EPC (Lower)] with the UP (
▲
) and DOWN (
▼
)
switches and press the ENTER switch, and the screen moves to the "Boom Angle Sensor
(Lower)" adjustment screen.
④
Press the ENTER switch to finish the adjustment mode. If the RETURN switch is pressed
during adjustment, adjustment is finished even in the calibration process.
Boom Angle Sensor for EPC
0
SET
0: Waiting
1: OK
2: NG SET; Set
③
When the display changes to "1", adjustment is completed.
Boom Angle Sensor for EPC (lower)
Q'ty Name Q'ty
Others
Tools to be used
Name
Facilities to be used
4
×
Precautions
3
×
1-2. Adjustment of boom angle (LOWER)
②
Lower the boom to the lower limit (cylinder stroke end) and then press the ENTER switch.
①
Select [07 Boom Angle Sensor for EPC (Lower)] with the UP (
▲
) and DOWN (
▼
)
switches and press the ENTER switch, and the screen moves to the "Boom Angle Sensor
(Lower)" adjustment screen.
④
Press the ENTER switch to finish the adjustment mode. If the RETURN switch is pressed
during adjustment, adjustment is finished even in the calibration process.
⑤
If the display changes to "2", the boom angle voltage is out of specification and
adjustment is not performed.
Boom Angle Sensor for EPC
0
SET
0: Waiting
1: OK
2: NG SET; Set
③
When the display changes to "1", adjustment is completed.
Boom Angle Sensor for EPC (lower)
1
0: Waiting
1: OK
2: NG
Boom Angle Sensor for EPC (lower)
1
0: Waiting
1: OK
2: NG
1 × 2 ×
1-2. Adjustment of boom angle (LOWER)
②
Lower the boom to the lower limit (cylinder stroke end) and then press the ENTER switch.
①
Select [07 Boom Angle Sensor for EPC (Lower)] with the UP (
▲
) and DOWN (
▼
)
switches and press the ENTER switch, and the screen moves to the "Boom Angle Sensor
(Lower)" adjustment screen.
④
Press the ENTER switch to finish the adjustment mode. If the RETURN switch is pressed
during adjustment, adjustment is finished even in the calibration process.
⑤
If the display changes to "2", the boom angle voltage is out of specification and
adjustment is not performed.
Boom Angle Sensor for EPC
0
SET
0: Waiting
1: OK
2: NG SET; Set
③
When the display changes to "1", adjustment is completed.
Boom Angle Sensor for EPC (lower)
1
0: Waiting
1: OK
2: NG
Boom Angle Sensor for EPC (lower)
1
0: Waiting
1: OK
2: NG
13