Komatsu PC18MR-3, Руководство по эксплуатации и техническому обслуживанию

Страница: 172 / 284

TRANSPORTING THE MACHINE
170 WEAM012101
SECURING THE MACHINE ON THE MEANS OF TRANSPORT
After positioning the machine on the trailer, it is necessary to secure it by proceeding as indicated below.
IMPORTANT
q
To avoid damaging the bucket cylinder during transport,
position a wooden block at one end of the cylinder to
prevent it from touching the ground.
1. Lower the blade.
2. Fully extend the bucket cylinder of the 2nd boom and lower
the 1st boom slowly.
3. Stop the engine and remove the ignition key.
4. Shift the safety lever (1) to the “locked” position (L).
5. Lock the cab door and cases with lock, see section "3.2.5
COVERS WITH LOCK".
IMPORTANT
q
Do not use the hole in the back of the undercarriage to tow
or lift the machine.
6. Position safety blocks under both ends of the tracks to avoid
machine movements during transport and fasten the
machine with chains or metal ropes or chains of adequate
resistance.
Pay special attention when fastening the machine in order to
avoid side sliding.
NOTE
q
When the machine is fastened with a chain or a metal rope, use
the bore in the lower car back and the bore in the blade side
plate.
RKA22440