Komatsu PC18MR-3, Руководство по эксплуатации и техническому обслуживанию

Страница: 115 / 284

INSTRUMENTS AND CONTROLS
WEAM012101
113
7. Raise the mat (4), pull the cab floor release lever (5) in the di-
rection indicated by the arrow and at the same time push the
handle (6) upwards in the direction indicated by the arrow
(approx. 45°).
IMPORTANT
q
If the cab floor does not tilt, pull the handle (6) downwards
and repeat the procedure described above.
q
When tilting or closing the cab floor, be extremely careful,
and keep away from the area under the cab floor.
NOTE
q
The cab floor tilts thanks to the operation of a gas cylinder, so
when the ambient temperature is low, the operating effort in-
creases.
8. After tilting the floor open, make sure that the locking pin (7)
is inserted in the groove (9) of the locking plate (8).
9. Insert the safety pin (10) into the hole (11) from the outside.
10. Turn until the coupling at the end of the safety pin (10) is
completely engaged with the pin (12).
NOTE
q
Make sure that the safety pin (10) is correctly engaged with the
pin (12).
RKA22760