Komatsu D155AX-8E0, Руководство по эксплуатации и техническому обслуживанию

Страница: 233 / 420

5.
Check if preheating pilot lamp on the monitor panel (3) is
lighting up.
If a password has been set, the input display screen will be
indicated on the monitor screen, but the preheating pilot
lamp operates as in the standard screen.
6.
Leave this condition until preheating pilot lamp goes out.
7.
After preheating pilot lamp goes out, turn the key of start-
ing switch (2) to START position (C), and start the engine.
The lighting time of preheating pilot lamp varies with the
ambient temperature as shown in the table.
Ambient temperature Lighting time (sec.)
–5 to –10 °C 20 to 27
–10 to –20 °C 27 to 40
–20 to –30 °C 40
8.
When the engine starts, release the starting switch key (2).
The key returns automatically to ON position (B).
REMARK
Just after starting the engine, run it at idle. During this period, release the decelerator pedal and perform
no operation of the work equipment.
Standard idling time
• In cold weather: Min. 15 sec.
• First start after replacement of engine oil or engine oil filter: 20 sec.
9.
After the engine speed is stabilized, perform the warm-up operation.
OPERATION MACHINE OPERATIONS AND CONTROLS
3-171