Komatsu D155AX-8E0, Руководство по эксплуатации и техническому обслуживанию

Страница: 166 / 420

REMARK
• When the gear is shifted, the current gear speed is displayed in the gear speed display section of the ma-
chine monitor.
(Example)
Neutral: "N" is displayed in the display section.
Forward 2nd: "F2" is displayed in the display section.
Reverse 3rd: "R3" is displayed in the display section.
When the parking brake lever is locked, "P" is displayed.
• For gear shift operation in the preset mode, see “SHIFT GEARS (3-180)”. The preset mode selection is the
operation to set the gear speeds to be selected in advance in N (Neutral) position.
Counter-rotation turn
k k
WARNING
If the R.H. and L.H. loads are uneven during counter-rotation turn, the machine may makes a pivot turn.
Accordingly, check the ground condition and pay attention to interference with obstacles during opera-
tion.
When the lever is tilted halfway in the direction you are turning
while it is in N (Neutral), the R.H. and L.H. track shoes rotate in
the opposite directions to each other to make a counter-rotation
turn slowly. If the lever is tilted fully, the counter-rotation turn
speed increases.
(R): Right counter-rotation turn
(L): Left counter-rotation turn
DECELERATOR PEDAL
k k
WARNING
• When passing over the top of a slope or when dump-
ing soil from a cliff, the load on the machine will sud-
denly be reduced and the travel speed will increase. In
this case, depress the decelerator pedal to reduce the
travel speed.
The decelerator pedal is used to reduce the engine speed or
stop the machine.
When changing the travel direction or stopping the machine,
depress the decelerator pedal to reduce the travel speed in advance.
EXPLANATION OF COMPONENTS OPERATION
3-104