Kolver K-DUCER, Руководство оператора

Страница: 5 / 82

Vers. 062721 5
INTRODUCTION
K-DUCER is the new class A intelligent transducerized assembly system from Kolver.
Thanks to a sophisticated control system, the electronic circuit communicates with KDS
series screwdriver equipped with integrated torque/angle transducer and allows to stop the
screwdriver instantly when reaching the preset torque or angle.
The AC 90÷260V - 50÷60Hz power supply is converted into 40VDC required by the KDS
series screwdrivers through a switching board.
IMPORTANT: K-DUCER is a highly accurate unit but it is critically important to select the
appropriate settings to ensure that the desired and proper torque is being applied and that
the screwdriver motor works efficiently. Read the menu description carefully and if unsure
please contact Kolver for support.
MODELS
K-DUCER power supply and control units are available in two versions:
Code Model Features
035001 KDU-1
035001/A KDU-1A
as KDU-1 + RJ45 connector, provoding
Modbus TCP (server) communication
protocol and Open Protocol v1.6rev3
K-DUCER units are compatible with any of the KDS electric screwdrivers with transducer,
available in straight, pistol and fixture configuration.
Code Model
Torque
(Nm)
Speed (rpm)
Min Max
175015 KDS-MT1.5 0,1-1,5 50 850
175015/ESD KDS-MT1.5/ESD 0,1-1,5 50 850
175016/ESD KDS-MT1.5P 0,1-1,5 50 850
175016/U/ESD KDS-MT1.5P/U 0,1-1,5 50 850
175115 KDS-MT1.5CA 0,1-1,5 50 850
175115/FN KDS-MT1.5CA/FN 0,1-1,5 50 850
175015/A KDS-MT1.5ANG 0,1-1,5 50 850
135006 KDS-PL6 0,5-6 50 850
135006/ESD KDS-PL6 0,5-6 50 850