Kolver K-DUCER, Руководство оператора

Страница: 49 / 82

Vers. 062721 49
The scan barcode screen will appear again after the current program completes on when
a new program number is selected.
ON PROG: on the main screen, the scan barcode screen will appear. Scanning a barcode
will load the program containing the matching barcode. If there is no program with a
matching barcode, the operator will be prompted to scan another barcode. The scan
barcode screen will appear again after the loaded program completes. You can configure
a barcode for each program via PROGRAM > OTHER >
BARCODE .
ON SEQ: : on the main screen, the scan barcode screen will appear. Scanning a barcode
will load the sequence containing the matching barcode. If there is no sequence with a
matching barcode, the operator will be prompted to scan another barcode. The scan
barcode screen will appear again after the loaded sequence completes. You can
configure a barcode for each sequence via the SEQUENCE SETTINGS menu. This
option is will only appear if SEQUENCE mode is active (SEQUENCE toggle on the
Sequence Settings menu).
(8) SWBX88/CBS880
Changes the working mode for the SWBX88 and CBS880 Kolver accessories:
OFF: disabled
ON PROG: the position selected on the accessory will load the program number
containing the matching SWBX88/CBS880 setting ( Programs > Other >
SWBX88/CBS880 ).
ON SEQ: the position selected on the accessory will load the corresponding sequence.
This sequence letters are matched to the numbers alphabetically (A-1, B-2, …, H-8). This
option is will only appear if SEQUENCE mode is active (
SEQUENCE toggle on the
Sequence Settings menu).
Also see: Connecting Kolver accessories SWBX88, CBS880
(9) LANGUAGE / UNIT / BRIGHTNESSS
LANGUAGE: choose the display language: English, Italian, French, German, Spanish,
Portuguese.
UNIT: choose the measurement units for torque: Nm, lbf.in, kgf.cm
DISPLAY BRIGHTNESS: increase or decrease the brightness of the touch screen display
(10) PASSCODE
Enables or disables the passcode lock for the configuration menu.
Tap the input field to enter a passcode, and enable the on/off toggle to activate it.
When the passcode is enabled, the lock icon on the main screen will have a red
background, and the passcode will be required to access the configuration menu.
Should you forget the passcode, contact Kolver to obtain a master passcode.
(11) DATE & TIME
Tap to change the date and time of the unit. This changes the date and time associated
with each (new) result reported in the serial print, usb, and modbus fields.
(12) TOUCH SCREEN CALIBRATION
Tap to enter the touch screen calibration function. Use this to correct problems with the
alignment of the touch response of the display.