Kolver 034000/TOP/TA, Руководство пользователя

Страница: 30 / 38

Vers. 100822 Page 30
TROUBLE SHOOTING
ERROR PROBLEM SOLUTION
0
“ waiting connection ” doesn’t turn into “ loading ” after
it’s been switched on.
Contact the nearest Kolver dealer.
1
“ Error Torque Control ” is displayed on the status bar Make a new screw. If the error persists,
change the torque and speed settings.
2
“ Error Fast Speed ” is displayed on the status bar
(the torque signal is displayed during the brake
time).
3
“ Reverse incomplete ” is displayed on the status bar
(the displayed torque signal is correct but the set
unscrewing is not complete).
4
“ Pre-Reverse incompl .” is displayed on the status bar
(the lever has been released before the runtime has
been achieved)
5
“ Under min time ” is displayed on the status bar (the
torque signal is displayed below the pre-set minimum
time).
6
“ Over maximum time ” is displayed on the status bar
(torque is not reached and the screwing time is over
the preset maximum time).
7
“ Error PV torque ” is displayed on the status bar (the
torque signal is displayed inside the set maximum
time).
8
“ Error min torque ” is displayed on the status bar
(the torque signal is displayed below the preset
minimum torque).
9
“ Error max torque ” is displayed on the status bar
(the torque signal is displayed over the set maximum
torque).
10
“ Error min angle ” is displayed on the status bar
(the torque signal is displayed below the set
minimum angle).