Kollmorgen
Maintenance
SILVER
LINE
®
Product Family
6-1
Section 6
Maintenance
6.1 INTRODUCTION
Information in this chapter will enable you to maintain the system components, ensuring smooth, efficient operation
of the motor. Preventative maintenance of the equipment is also specified along with periodic maintenance. Follow
these practices when operating your servo system.
6.2 SPARE PARTS
6.2.1 S/O Spare Parts List
Connector Kit Series S/O: SO-C100
BJ-BKO-10: J204 (Velocity Loop only)
You can use scissors to cut ribbon cable. A bench vise is necessary to make up ribbon cable connectors.
6.2.2 SPS/R Spare Parts List
1.5 Amp Slow-Blow Glass Fuse
Qty.
2
1.2 Amp Slow-Blow Glass Fuse
Qty.
1
6.2.3 Ordering Information
If you need to order parts for the S/O and/or SPS/R, you can order them through your local distributor. For a
complete list of Kollmorgen representatives contact the ICP regional office.
6.3 PREVENTATIVE MAINTENANCE
Preventative maintenance can prevent situations that will damage your equipment. Four types of preventative
maintenance are presented below. Following each of the procedures can reduce problems with and add life to your
equipment.
Electronic components in this
amplifier are static sensitive.
Use proper procedures when
handling component boards.
CAUTION
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
