Kollmorgen SILVERLINE S/O Series, Руководство пользователя

Страница: 43 / 72

Kollmorgen Mounting and Wiring
SILVER LINE
®
Product Family
4-16
Table 4-11 S/O Connector Function
Name Location Type Description
J1 Power Main PCB 5- Pin Screw
Terminal Connections for power bus and motor
leads.
J2
120
°
Main PCB Jumper
120
°
select. Install for SILVER LINE
BLDC motors and other 120
°
BLDC
Motors. Remove for Brush and 60
°
BLDC
Motors.
J3 CL Main PCB 2-pin WAGO cage
clamp Install current loop compensation
capacitor.
J4 RL Main PCB 2-pin WAGO cage
clamp Install current loop compensation resistor.
J5 Current/
Voltage
Mode
Main PCB Two position
jumper Install in "C" for current-loop and velocity-
loop modes. Install in "O" for open loop.
J6 Status and
Control
Main PCB 6-pin Screw
Terminal Current command, Enable, AMP OK
J7 Hall
Sensor
Main PCB 5-pin Screw
Terminal Connect to Hall sensor cable from motor.
JB1 Bus Out Main PCB 2-pin Screw
Terminal Bus power for velocity loop option.
JL1
±
15 VDC
Output
(5mA)
Main PCB 4-pin crimp
Connector
±
15 VDC for Velocity Loop Option Card.
J200 Logic
Power
Velocity Loop
Option PCB 3-pin crimp
connector Logic Power for Velocity Loop Option.
Installed at factory. Wired to JB1 at
factory.
J201 Control Velocity Loop
Option PCB
6-pin Screw
Terminal Analog I/O for Velocity Loop Option.
J203 Feedback
Encoder
Velocity Loop
Option PCB 10-pin Ribbon
Cable Connector Identical to J204. Provided for
convenience.
J204 Feedback
Encoder
Velocity Loop
Option PCB 10-pin Ribbon
Cable Connector Feedback Encoder connection for Velocity
Loop.
J205
±
15 VDC
Input
Velocity Loop
Option PCB 4-pin crimp
Connector
±
15 VDC for Velocity Loop Option Card.
Wired to JL1 at factory.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com